use:

The 1 power line, electric irons must use three core braided cord. Among them, the green, yellow double color line (some of the black line) is the ground wire, red wire to wire, white line to zero line. The socket must also be equipped with three holes, and reliable grounding. Do not use plastic instead of power lines, because the poor thermal performance of plastic, a slight inadvertent power line touch on the hot shell or the bottom; will melt the plastic insulation layer and electric shock accident.

2, the length of the 2m is appropriate for the power supply line. If too long, and arrange is not good, let the power line drag on the ground and move may stumble electric irons, and fell to the floor or scorch ironing clothing, even hurt.

3, in the clothes of the intermittent, should be placed on the electric iron, or placed on a dedicated electric iron shelf. Must not drop electric irons placed in flammable items, so as not to fire; don't put the electric iron in the iron or stone, in order to avoid scratching the floor plating layer.

4, to remove the dirt on the surface of the electric iron. Chemical fiber fabric surface villi is easy to melt, and backing sheet is adhered on coking, the formation of dark spots, not only ugly, but also to use is inconvenient. In order to avoid this kind of dirt, ironing in chemical fiber fabric, can be a clean damp cloth pad. If the floor spots appear, must not use a knife to scrape, that will destroy the bottom cladding. The most convenient and effective method is: first use a damp cloth dipped in a little toothpaste, slowly wipe the rust, to be wiped clean after, and then coated with a layer of wax, the power supply is switched on, the wax is melted and then rub. If the parts in the electric iron rust on the bottom surface, a waste cloth pad, pulled back and forth several times more iron. Thus removing dirt, not only does not damage electric iron plating layer, but also to restore the original smooth and peaceful.

After the end of the use of 5, electric irons (or in the middle of the power outage), should unplug the power plug and let the natural cooling must be waiting for no sensation of touch, and then into the box door.

6, ordinary type of electric iron can not control the temperature, it is difficult to meet all kinds of clothes ironing requirements. Especially in the iron fiber fabric, a little carelessness will burn the clothes bad, sometimes only with the user experience to master the temperature. Continuous electrical time should not be too long for a common electric iron. Otherwise, because of the gradual temperature increase (up to 600 to 700 DEG C), to burn out electric heating element, the plating layer damage and hot bad clothes. Generally take the power of the method to the general control of the temperature of the bottom, so do not save energy and safety.

• Yang Huiqin
• phone number: 18958493080
• telephone number: 057985185353
• mail: 981074842@qq.com
• my micro channel: 18958493080

• to return to the shop home please point here